Telescopic Clamshell
This TELESCOPIC CLAMSHELL exhibits the best performance in deep pit bottom excavating works for a multi-story building foundation or caisson. The combination of both a clamshell of maximum bucket capacity and a telescopic arm of higher extension-retraction speed in this machine class greatly improve its working efficiency.
Caisson Specs (Electric Powered Excavator)
An ELECTRIC POWERED EXCAVATOR secures clean working environment without discharging exhaust gas and keeps excellent working stillness. It exhibits best operating performance in deep caisson or shaft excavating for bridge foundation or land-slide countermeasures and the like, including other special foundation excavating for a high-voltage power transmission tower in mountain districts where a large-sized machine is difficult to be transported.
Underground Demolition Specs
An excavator-base machine with UNDERGROUND DEMOLITION SPECS of extra-low height enables to perform demolition works of a building from roof top to underground. In addition, it can be also applied even in a confined job site where an ordinary demolition machine with a long-reach boom and arm cannot be efficiently applied.
1. Hydraulic circuit for rotatory hydraulic crusher is equipped as standard.
2. A machine with extra-low height cab can travel under 2.5-meter beam in height.
3. Two-piece booms adopted on this machine realize pull-down operation of 3.5-meter wall in height and provide a compact transport posture.
4. Dustproof net adopted on the side cover prevents the engine from getting dust intrusion into the engine compartment even in dusty demolition job sites.
* With Crusher & Cutter (C & C17R)
GEO Master (Foundation Excavating Specs)
GEO MASTER optimizes excavating, loading or gathering operation of earth in a confined working space such as building foundation space and subway of tunnel job site.
Super GEO (Extra low-height excavator)
SUPER GEO of which maximum overall height is only 1.99 meters exhibits its best operating performance in a confined low-height space such as building foundation space, shopping center or parking area in underground spaces, thus greatly improving their working efficiency in such spaces.
Double Arms (For reverse-side ditching)
A bucket mounted on DOUBLE ARMS facilitates reverse-side ditching under or around obstacles through their link motions. Besides, the additional arm can be easily changed to the bucket with quick couplers.
NOTE: DOUBLE ARMS AND OFF-SET BOOM CANNOT BE SIMULTANEOUSLY CONTROLLED.
Tilting Cab
This excavator-based machine can keep the operator’s compartment horizontal even on a sloped terrain with a tilt device consisting of two control cylinders, thus ensuring efficient and comfortable logging operation in forest or woods.
Applicable for Forestry
PC78US (with tilting cab)
This machine employs the undercarriage of PC138US and the upper structure and tilting mechanism of PC78US to increase its stability and ability to travel through on slopes.
PC75UU
FORWARD TILT ANGLE : MAX. 20 DEGREES
BACKWARD TILT ANGLE : MAX. 7 DEGREES
LEFT & RIGHT TILT ANGLE : MAX. 12 DEGREES, EACH
METAL RECYCLING WORKS
High-mount Cab
There are two types of high-mount cab. One is a fixed type. Other is an elevating type. A high-mount cab provides the operator with wider and clearer field view, thus facilitating loading or unloading of scrap on or off a truck and charging or discharging into or out of scrap processing machines. The hydraulic elevating cab lowered ensures better transportability.
LC SERIES ARE ALSO AVAILABLE. (PC200~PC400)
Fixed type High-mount cab
MARINE-HARBOR WORKS FOREST INDUSTRIES
Muddy Soil Excavating Specs
MUDDY SOIL EXCAVATING SPECS provides a large ground contact area of undercarriages and big floating capacity of the lower travel body. The excavator with these specs realizes an extremely low ground pressure, thus enabling safety operation even on an extra-weakly supported ground. Besides, adoption of IN-SHOE type travel motors ensures safety digging in near front of or around the undercarriage components.
Tower Yarder
An excavator-based yarding machine with a winch, called TOWER YARDER, features an excellent controllability and high mobility. It also ensures easy operation without requiring any sub-wire ropes and skylines, thus enabling great improvement of job efficiency in timber yarding.
OPTION: GRAPPLE IN PHOTO
MARINE-HARBOR WORKS
Aqua-digger (Backhoe Type Specs)
An excavator based machine with BACK-HOE TYPE SPECS mounted on a vessel exhibits its best operating performance in large-scaled ocean works such as filling-up reclamation to build a land, adjustment or enlargement of harbors and demolition or rehabilitation of breakwaters. In addition, the best selection of front ATT like a large capacity bucket or an optimum breaker realizes comfortable operation of high job efficiency. As for mounting method, besides an excavator type with undercarriages, two methods (gantry- and fixedtype) are provided.
APPLICABLE MODEL PC200~PC3000
(UNDERCARRIAGE-LESS TYPE IS ALSO AVAILABLE.)